Brass Blank Dial - 44.8mm diameter and .8mm thickness or a 40mm dial blank at .6mm thickness.  Each dial includes dial feet for NH35 (NH34, and NH36 and all Seiko movements sharing the same dial foot positions) and dial feet for the ETA 2824-2 (SW200, 2892A2, and all movements sharing the same dial foot positions).  You remove whichever dial feet you don’t need to use on the other movement.   Please note that a .8mm thick dial will normally require a high canon pinion for hand clearance.  Alternatively you can use a Seiko GMT without the GMT hand installed to get a high clearance on your hour hand.  However if you can order a higher canon height movement with this thickness it is recommended. (or use longer post watch hands).   Feel free to message me for more information or with any questions.  
There are no returns for this item.  Brass blank watch dials with preinstalled dial feet are  sold exclusively  for other dial makers to use in their own production and this item is not returnable or covered under warranty.